JezK

Edit File: dracut

#!/usr/bin/bash -p # # Generator script for a dracut initramfs # Copyright 2005-2013 Red Hat, Inc. All rights reserved. # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. # # store for logging unset BASH_ENV unset GZIP # Verify bash version, current minimum is 4 if ((BASH_VERSINFO[0] < 4)); then printf -- 'You need at least Bash 4 to use dracut, sorry.' >&2 exit 1 fi dracut_args=("$@") # shellcheck disable=SC2155 readonly dracut_cmd=$(readlink -f "$0") set -o pipefail usage() { [[ $sysroot_l ]] && dracutsysrootdir="$sysroot_l" [[ $dracutbasedir ]] || dracutbasedir="$dracutsysrootdir"/usr/lib/dracut if [[ -f $dracutbasedir/dracut-version.sh ]]; then # shellcheck source=./dracut-version.sh . "$dracutbasedir"/dracut-version.sh fi # 80x25 linebreak here ^ cat << EOF Usage: $dracut_cmd [OPTION]... [<initramfs> [<kernel-version>]] Version: $DRACUT_VERSION Creates initial ramdisk images for preloading modules -h, --help Display all options If a [LIST] has multiple arguments, then you have to put these in quotes. For example: # dracut --add-drivers "module1 module2" ... EOF } long_usage() { [[ $dracutbasedir ]] || dracutbasedir="$dracutsysrootdir"/usr/lib/dracut if [[ -f $dracutbasedir/dracut-version.sh ]]; then # shellcheck source=./dracut-version.sh . "$dracutbasedir"/dracut-version.sh fi # 80x25 linebreak here ^ cat << EOF Usage: $dracut_cmd [OPTION]... [<initramfs> [<kernel-version>]] Version: $DRACUT_VERSION Creates initial ramdisk images for preloading modules --kver [VERSION] Set kernel version to [VERSION]. -f, --force Overwrite existing initramfs file. [OUTPUT_FILE] --rebuild Append the current arguments to those with which the input initramfs image was built. This option helps in incrementally building the initramfs for testing. If optional [OUTPUT_FILE] is not provided, the input initramfs provided to rebuild will be used as output file. -a, --add [LIST] Add a space-separated list of dracut modules. --force-add [LIST] Force to add a space-separated list of dracut modules to the default set of modules, when -H is specified. -o, --omit [LIST] Omit a space-separated list of dracut modules. -m, --modules [LIST] Specify a space-separated list of dracut modules to call when building the initramfs. Modules are located in /usr/lib/dracut/modules.d. This option forces dracut to only include the specified dracut modules. In most cases the --add option is what you want to use. --add-drivers [LIST] Specify a space-separated list of kernel modules to add to the initramfs. --force-drivers [LIST] Specify a space-separated list of kernel modules to add to the initramfs and make sure they are tried to be loaded via modprobe same as passing rd.driver.pre=DRIVER kernel parameter. --omit-drivers [LIST] Specify a space-separated list of kernel modules not to add to the initramfs. -d, --drivers [LIST] Specify a space-separated list of kernel modules to exclusively include in the initramfs. --filesystems [LIST] Specify a space-separated list of kernel filesystem modules to exclusively include in the generic initramfs. -k, --kmoddir [DIR] Specify the directory where to look for kernel modules. --fwdir [DIR] Specify additional colon-separated list of directories where to look for firmware files. --libdirs [LIST] Specify a space-separated list of directories where to look for libraries. --kernel-only Only install kernel drivers and firmware files. --no-kernel Do not install kernel drivers and firmware files. --print-cmdline Print the kernel command line for the given disk layout. --early-microcode Combine early microcode with ramdisk. --no-early-microcode Do not combine early microcode with ramdisk. --kernel-cmdline [PARAMETERS] Specify default kernel command line parameters. --strip Strip binaries in the initramfs. --aggresive-strip Strip more than just debug symbol and sections, for a smaller initramfs build. The --strip option must also be specified. --nostrip Do not strip binaries in the initramfs. --hardlink Hardlink files in the initramfs. --nohardlink Do not hardlink files in the initramfs. --prefix [DIR] Prefix initramfs files with [DIR]. --noprefix Do not prefix initramfs files. --mdadmconf Include local /etc/mdadm.conf file. --nomdadmconf Do not include local /etc/mdadm.conf file. --lvmconf Include local /etc/lvm/lvm.conf file. --nolvmconf Do not include local /etc/lvm/lvm.conf file. --fscks [LIST] Add a space-separated list of fsck helpers. --nofscks Inhibit installation of any fsck helpers. --ro-mnt Mount / and /usr read-only by default. -h, --help This message. --debug Output debug information of the build process. --profile Output profile information of the build process. -L, --stdlog [0-6] Specify logging level (to standard error) 0 - suppress any messages 1 - only fatal errors 2 - all errors 3 - warnings 4 - info 5 - debug info (here starts lots of output) 6 - trace info (and even more) -v, --verbose Increase verbosity level. -q, --quiet Decrease verbosity level. -c, --conf [FILE] Specify configuration file to use. Default: /etc/dracut.conf --confdir [DIR] Specify configuration directory to use *.conf files from. Default: /etc/dracut.conf.d --add-confdir [DIR] Add an extra configuration directory to use *.conf files from. If the directory is not existed, will look for subdirectory under confdir. --tmpdir [DIR] Temporary directory to be used instead of default ${TMPDIR:-/var/tmp}. -r, --sysroot [DIR] Specify sysroot directory to collect files from. -l, --local Local mode. Use modules from the current working directory instead of the system-wide installed in /usr/lib/dracut/modules.d. Useful when running dracut from a git checkout. -H, --hostonly Host-only mode: Install only what is needed for booting the local host instead of a generic host. -N, --no-hostonly Disables host-only mode. --hostonly-mode [MODE] Specify the host-only mode to use. [MODE] could be one of "sloppy" or "strict". "sloppy" mode is used by default. In "sloppy" host-only mode, extra drivers and modules will be installed, so minor hardware change won't make the image unbootable (e.g. changed keyboard), and the image is still portable among similar hosts. With "strict" mode enabled, anything not necessary for booting the local host in its current state will not be included, and modules may do some extra job to save more space. Minor change of hardware or environment could make the image unbootable. DO NOT use "strict" mode unless you know what you are doing. --hostonly-cmdline Store kernel command line arguments needed in the initramfs. --no-hostonly-cmdline Do not store kernel command line arguments needed in the initramfs. --no-hostonly-default-device Do not generate implicit host devices like root, swap, fstab, etc. Use "--mount" or "--add-device" to explicitly add devices as needed. --hostonly-i18n Install only needed keyboard and font files according to the host configuration (default). --no-hostonly-i18n Install all keyboard and font files available. --hostonly-nics [LIST] Only enable listed NICs in the initramfs. The list can be empty, so other modules can install only the necessary network drivers. --persistent-policy [POLICY] Use [POLICY] to address disks and partitions. POLICY can be any directory name found in /dev/disk. E.g. "by-uuid", "by-label" --fstab Use /etc/fstab to determine the root device. --add-fstab [FILE] Add file to the initramfs fstab. --mount "[DEV] [MP] [FSTYPE] [FSOPTS]" Mount device [DEV] on mountpoint [MP] with filesystem [FSTYPE] and options [FSOPTS] in the initramfs. --mount "[MP]" Same as above, but [DEV], [FSTYPE] and [FSOPTS] are determined by looking at the current mounts. --add-device "[DEV]" Bring up [DEV] in initramfs. -i, --include [SOURCE] [TARGET] Include the files in the SOURCE directory into the Target directory in the final initramfs. If SOURCE is a file, it will be installed to TARGET in the final initramfs. -I, --install [LIST] Install the space separated list of files into the initramfs. --install-optional [LIST] Install the space separated list of files into the initramfs, if they exist. --gzip Compress the generated initramfs using gzip. This will be done by default, unless another compression option or --no-compress is passed. --bzip2 Compress the generated initramfs using bzip2. Make sure your kernel has bzip2 decompression support compiled in, otherwise you will not be able to boot. --lzma Compress the generated initramfs using lzma. Make sure your kernel has lzma support compiled in, otherwise you will not be able to boot. --xz Compress the generated initramfs using xz. Make sure that your kernel has xz support compiled in, otherwise you will not be able to boot. --lzo Compress the generated initramfs using lzop. Make sure that your kernel has lzo support compiled in, otherwise you will not be able to boot. --lz4 Compress the generated initramfs using lz4. Make sure that your kernel has lz4 support compiled in, otherwise you will not be able to boot. --zstd Compress the generated initramfs using Zstandard. Make sure that your kernel has zstd support compiled in, otherwise you will not be able to boot. --compress [COMPRESSION] Compress the generated initramfs with the passed compression program. Make sure your kernel knows how to decompress the generated initramfs, otherwise you will not be able to boot. --no-compress Do not compress the generated initramfs. This will override any other compression options. --squash-compressor [COMPRESSION] Specify the compressor and compressor specific options used by mksquashfs if squash module is called when building the initramfs. --enhanced-cpio Attempt to reflink cpio file data using dracut-cpio. --list-modules List all available dracut modules. -M, --show-modules Print included module's name to standard output during build. --keep Keep the temporary initramfs for debugging purposes. --printsize Print out the module install size. --sshkey [SSHKEY] Add SSH key to initramfs (use with ssh-client module). --logfile [FILE] Logfile to use (overrides configuration setting). --reproducible Create reproducible images. --no-reproducible Do not create reproducible images. --loginstall [DIR] Log all files installed from the host to [DIR]. --uefi Create an UEFI executable with the kernel cmdline and kernel combined. --no-uefi Disables UEFI mode. --no-machineid Affects the default output filename of the UEFI executable, discarding the <MACHINE_ID> part. --uefi-stub [FILE] Use the UEFI stub [FILE] to create an UEFI executable. --uefi-splash-image [FILE] Use [FILE] as a splash image when creating an UEFI executable. Requires bitmap (.bmp) image format. --kernel-image [FILE] Location of the kernel image. --sbat [PARAMETERS] The SBAT parameters to be added to .sbat. The string "sbat,1,SBAT Version,sbat,1, https://github.com/rhboot/shim/blob/main/SBAT.md" is already added by default. --regenerate-all Regenerate all initramfs images at the default location for the kernel versions found on the system. -p, --parallel Use parallel processing if possible (currently only supported --regenerate-all) images simultaneously. --version Display version. If [LIST] has multiple arguments, then you have to put these in quotes. For example: # dracut --add-drivers "module1 module2" ... EOF } long_version() { [[ $dracutbasedir ]] || dracutbasedir="$dracutsysrootdir"/usr/lib/dracut if [[ -f $dracutbasedir/dracut-version.sh ]]; then # shellcheck source=./dracut-version.sh . "$dracutbasedir"/dracut-version.sh fi echo "dracut $DRACUT_VERSION" } # Fills up host_devs stack variable and makes sure there are no duplicates push_host_devs() { local _dev for _dev in "$@"; do [[ " ${host_devs[*]} " == *" $_dev "* ]] && return host_devs+=("$_dev") done } # Little helper function for reading args from the commandline. # it automatically handles -a b and -a=b variants, and returns 1 if # we need to shift $3. read_arg() { # $1 = arg name # $2 = arg value # $3 = arg parameter local rematch='^[^=]*=(.*)$' if [[ $2 =~ $rematch ]]; then read -r "$1" <<< "${BASH_REMATCH[1]}" else read -r "$1" <<< "$3" # There is no way to shift our callers args, so # return 1 to indicate they should do it instead. return 1 fi } check_conf_file() { if grep -H -e '^[^#]*[+]=\("[^ ]\|.*[^ ]"\)' "$@"; then printf '\ndracut: WARNING: <key>+=" <values> ": <values> should have surrounding white spaces!\n' >&2 printf 'dracut: WARNING: This will lead to unwanted side effects! Please fix the configuration file.\n\n' >&2 fi } dropindirs_sort() { local suffix=$1 shift local -a files local f d for d in "$@"; do for i in "$d/"*"$suffix"; do if [[ -e $i ]]; then printf "%s\n" "${i##*/}" fi done done | sort -Vu | { readarray -t files for f in "${files[@]}"; do for d in "$@"; do if [[ -e "$d/$f" ]]; then printf "%s\n" "$d/$f" continue 2 fi done done } } rearrange_params() { # Workaround -i, --include taking 2 arguments newat=() for i in "$@"; do if [[ $i == "-i" ]] || [[ $i == "--include" ]]; then newat+=("++include") # Replace --include by ++include else newat+=("$i") fi done set -- "${newat[@]}" # Set new $@ TEMP=$( unset POSIXLY_CORRECT getopt \ -o "a:m:o:d:I:k:c:r:L:fvqlHhMNp" \ --long kver: \ --long add: \ --long force-add: \ --long add-drivers: \ --long force-drivers: \ --long omit-drivers: \ --long modules: \ --long omit: \ --long drivers: \ --long filesystems: \ --long install: \ --long install-optional: \ --long fwdir: \ --long libdirs: \ --long fscks: \ --long add-fstab: \ --long mount: \ --long device: \ --long add-device: \ --long nofscks \ --long ro-mnt \ --long kmoddir: \ --long conf: \ --long confdir: \ --long add-confdir: \ --long tmpdir: \ --long sysroot: \ --long stdlog: \ --long compress: \ --long squash-compressor: \ --long prefix: \ --long rebuild: \ --long force \ --long kernel-only \ --long no-kernel \ --long print-cmdline \ --long kernel-cmdline: \ --long strip \ --long aggresive-strip \ --long nostrip \ --long hardlink \ --long nohardlink \ --long noprefix \ --long mdadmconf \ --long nomdadmconf \ --long lvmconf \ --long nolvmconf \ --long debug \ --long profile \ --long sshkey: \ --long logfile: \ --long verbose \ --long quiet \ --long local \ --long hostonly \ --long host-only \ --long no-hostonly \ --long no-host-only \ --long hostonly-mode: \ --long hostonly-cmdline \ --long no-hostonly-cmdline \ --long no-hostonly-default-device \ --long persistent-policy: \ --long fstab \ --long help \ --long bzip2 \ --long lzma \ --long xz \ --long lzo \ --long lz4 \ --long zstd \ --long no-compress \ --long gzip \ --long enhanced-cpio \ --long list-modules \ --long show-modules \ --long keep \ --long printsize \ --long regenerate-all \ --long parallel \ --long noimageifnotneeded \ --long early-microcode \ --long no-early-microcode \ --long reproducible \ --long no-reproducible \ --long loginstall: \ --long uefi \ --long no-uefi \ --long uefi-stub: \ --long uefi-splash-image: \ --long kernel-image: \ --long sbat: \ --long no-hostonly-i18n \ --long hostonly-i18n \ --long hostonly-nics: \ --long no-machineid \ --long version \ -- "$@" ) # shellcheck disable=SC2181 if (($? != 0)); then usage exit 1 fi } verbosity_mod_l=0 unset kernel unset outfile rearrange_params "$@" eval set -- "$TEMP" # parse command line args to check if '--rebuild' option is present unset append_args_l unset rebuild_file while :; do if [ "$1" == "--" ]; then shift break fi if [ "$1" == "--rebuild" ]; then append_args_l="yes" rebuild_file="$2" if [ ! -e "$rebuild_file" ]; then echo "Image file '$rebuild_file', for rebuild, does not exist!" exit 1 fi abs_rebuild_file=$(readlink -f "$rebuild_file") && rebuild_file="$abs_rebuild_file" shift continue fi shift done # get output file name and kernel version from command line arguments while (($# > 0)); do case ${1%%=*} in ++include) shift 2 ;; *) if ! [[ ${outfile+x} ]]; then outfile=$1 elif ! [[ ${kernel+x} ]]; then kernel=$1 else printf "\nUnknown arguments: %s\n\n" "$*" >&2 usage exit 1 fi ;; esac shift done # extract input image file provided with rebuild option to get previous parameters, if any if [[ $append_args_l == "yes" ]]; then unset rebuild_param # determine resultant file if ! [[ $outfile ]]; then outfile=$rebuild_file fi if ! rebuild_param=$(lsinitrd "$rebuild_file" '*lib/dracut/build-parameter.txt'); then echo "Image '$rebuild_file' has no rebuild information stored" exit 1 fi # prepend previous parameters to current command line args if [[ $rebuild_param ]]; then TEMP="$rebuild_param $TEMP" eval set -- "$TEMP" rearrange_params "$@" fi fi unset PARMS_TO_STORE PARMS_TO_STORE="" eval set -- "$TEMP" while :; do if [[ $1 != "--" ]] && [[ $1 != "--rebuild" ]]; then PARMS_TO_STORE+=" $1" fi case $1 in --kver) kernel="$2" PARMS_TO_STORE+=" '$2'" shift ;; -a | --add) add_dracutmodules_l+=("$2") PARMS_TO_STORE+=" '$2'" shift ;; --force-add) force_add_dracutmodules_l+=("$2") PARMS_TO_STORE+=" '$2'" shift ;; --add-drivers) add_drivers_l+=("$2") PARMS_TO_STORE+=" '$2'" shift ;; --force-drivers) force_drivers_l+=("$2") PARMS_TO_STORE+=" '$2'" shift ;; --omit-drivers) omit_drivers_l+=("$2") PARMS_TO_STORE+=" '$2'" shift ;; -m | --modules) dracutmodules_l+=("$2") PARMS_TO_STORE+=" '$2'" shift ;; -o | --omit) omit_dracutmodules_l+=("$2") PARMS_TO_STORE+=" '$2'" shift ;; -d | --drivers) drivers_l+=("$2") PARMS_TO_STORE+=" '$2'" shift ;; --filesystems) filesystems_l+=("$2") PARMS_TO_STORE+=" '$2'" shift ;; -I | --install) install_items_l+=("$2") PARMS_TO_STORE+=" '$2'" shift ;; --install-optional) install_optional_items_l+=("$2") PARMS_TO_STORE+=" '$2'" shift ;; --fwdir) fw_dir_l+=("$2") PARMS_TO_STORE+=" '$2'" shift ;; --libdirs) libdirs_l+=("$2") PARMS_TO_STORE+=" '$2'" shift ;; --fscks) fscks_l+=("$2") PARMS_TO_STORE+=" '$2'" shift ;; --add-fstab) add_fstab_l+=("$2") PARMS_TO_STORE+=" '$2'" shift ;; --mount) fstab_lines+=("$2") PARMS_TO_STORE+=" '$2'" shift ;; --add-device | --device) add_device_l+=("$2") PARMS_TO_STORE+=" '$2'" shift ;; --kernel-cmdline) kernel_cmdline_l+=("$2") PARMS_TO_STORE+=" '$2'" shift ;; --nofscks) nofscks_l="yes" ;; --ro-mnt) ro_mnt_l="yes" ;; -k | --kmoddir) drivers_dir_l="$2" PARMS_TO_STORE+=" '$2'" shift ;; -c | --conf) conffile="$2" PARMS_TO_STORE+=" '$2'" shift ;; --confdir) confdir="$2" PARMS_TO_STORE+=" '$2'" shift ;; --add-confdir) add_confdir="$2" PARMS_TO_STORE+=" '$2'" shift ;; --tmpdir) tmpdir_l="$2" PARMS_TO_STORE+=" '$2'" shift ;; -r | --sysroot) sysroot_l="$2" PARMS_TO_STORE+=" '$2'" shift ;; -L | --stdlog) stdloglvl_l="$2" PARMS_TO_STORE+=" '$2'" shift ;; --compress) compress_l="$2" PARMS_TO_STORE+=" '$2'" shift ;; --squash-compressor) squash_compress_l="$2" PARMS_TO_STORE+=" '$2'" shift ;; --prefix) prefix_l="$2" PARMS_TO_STORE+=" '$2'" shift ;; --loginstall) loginstall_l="$2" PARMS_TO_STORE+=" '$2'" shift ;; --rebuild) if [[ $rebuild_file == "$outfile" ]]; then force=yes fi shift ;; -f | --force) force=yes ;; --kernel-only) kernel_only="yes" no_kernel="no" ;; --no-kernel) kernel_only="no" no_kernel="yes" ;; --print-cmdline) print_cmdline="yes" hostonly_l="yes" kernel_only="yes" no_kernel="yes" ;; --early-microcode) early_microcode_l="yes" ;; --no-early-microcode) early_microcode_l="no" ;; --strip) do_strip_l="yes" ;; --aggresive-strip) aggresive_strip_l="yes" ;; --nostrip) do_strip_l="no" ;; --hardlink) do_hardlink_l="yes" ;; --nohardlink) do_hardlink_l="no" ;; --noprefix) prefix_l="/" ;; --mdadmconf) mdadmconf_l="yes" ;; --nomdadmconf) mdadmconf_l="no" ;; --lvmconf) lvmconf_l="yes" ;; --nolvmconf) lvmconf_l="no" ;; --debug) debug="yes" ;; --profile) profile="yes" ;; --sshkey) sshkey="$2" PARMS_TO_STORE+=" '$2'" shift ;; --logfile) logfile_l="$2" shift ;; -v | --verbose) ((verbosity_mod_l++)) ;; -q | --quiet) ((verbosity_mod_l--)) ;; -l | --local) allowlocal="yes" [[ -f "$(readlink -f "${0%/*}")/dracut-init.sh" ]] \ && dracutbasedir="$(readlink -f "${0%/*}")" ;; -H | --hostonly | --host-only) hostonly_l="yes" ;; -N | --no-hostonly | --no-host-only) hostonly_l="no" ;; --hostonly-mode) hostonly_mode_l="$2" PARMS_TO_STORE+=" '$2'" shift ;; --hostonly-cmdline) hostonly_cmdline_l="yes" ;; --hostonly-i18n) i18n_install_all_l="no" ;; --hostonly-nics) hostonly_nics_l+=("$2") PARMS_TO_STORE+=" '$2'" shift ;; --no-hostonly-i18n) i18n_install_all_l="yes" ;; --no-hostonly-cmdline) hostonly_cmdline_l="no" ;; --no-hostonly-default-device) hostonly_default_device="no" ;; --persistent-policy) persistent_policy_l="$2" PARMS_TO_STORE+=" '$2'" shift ;; --fstab) use_fstab_l="yes" ;; -h | --help) long_usage exit 1 ;; --bzip2) compress_l="bzip2" ;; --lzma) compress_l="lzma" ;; --xz) compress_l="xz" ;; --lzo) compress_l="lzo" ;; --lz4) compress_l="lz4" ;; --zstd) compress_l="zstd" ;; --no-compress) _no_compress_l="cat" ;; --gzip) compress_l="gzip" ;; --enhanced-cpio) enhanced_cpio_l="yes" ;; --list-modules) do_list="yes" ;; -M | --show-modules) show_modules_l="yes" ;; --keep) keep="yes" ;; --printsize) printsize="yes" ;; --regenerate-all) regenerate_all_l="yes" ;; -p | --parallel) parallel_l="yes" ;; --noimageifnotneeded) noimageifnotneeded="yes" ;; --reproducible) reproducible_l="yes" ;; --no-reproducible) reproducible_l="no" ;; --uefi) uefi_l="yes" ;; --no-uefi) uefi_l="no" ;; --uefi-stub) uefi_stub_l="$2" PARMS_TO_STORE+=" '$2'" shift ;; --uefi-splash-image) uefi_splash_image_l="$2" PARMS_TO_STORE+=" '$2'" shift ;; --kernel-image) kernel_image_l="$2" PARMS_TO_STORE+=" '$2'" shift ;; --sbat) sbat_l="$2" PARMS_TO_STORE+=" '$2'" shift ;; --no-machineid) machine_id_l="no" ;; --version) long_version exit 1 ;; --) shift break ;; *) # should not even reach this point printf "\n!Unknown option: '%s'\n\n" "$1" >&2 usage exit 1 ;; esac shift done # getopt cannot handle multiple arguments, so just handle "-I,--include" # the old fashioned way while (($# > 0)); do if [ "${1%%=*}" == "++include" ]; then include_src+=("$2") include_target+=("$3") PARMS_TO_STORE+=" --include '$2' '$3'" shift 2 fi shift done [[ $sysroot_l ]] && dracutsysrootdir="$sysroot_l" export LC_ALL=C export LANG=C unset LC_MESSAGES unset LC_CTYPE unset LD_LIBRARY_PATH unset LD_PRELOAD unset GREP_OPTIONS export DRACUT_LOG_LEVEL=warning [[ $debug ]] && { export DRACUT_LOG_LEVEL=debug export PS4='${BASH_SOURCE}@${LINENO}(${FUNCNAME[0]-}): ' set -x } [[ $profile ]] && { export PS4='+ $(date "+%s.%N") ${BASH_SOURCE}@${LINENO}: ' set -x debug=yes } [[ $dracutbasedir ]] || dracutbasedir="$dracutsysrootdir"/usr/lib/dracut # if we were not passed a config file, try the default one if [[ -z $conffile ]]; then if [[ $allowlocal ]]; then conffile="$dracutbasedir/dracut.conf" else conffile="$dracutsysrootdir/etc/dracut.conf" fi elif [[ ! -e $conffile ]]; then printf "%s\n" "dracut: Configuration file '$conffile' not found." >&2 exit 1 fi if [[ -z $confdir ]]; then if [[ $allowlocal ]]; then confdir="$dracutbasedir/dracut.conf.d" else confdir="$dracutsysrootdir/etc/dracut.conf.d" fi elif [[ ! -d $confdir ]]; then printf "%s\n" "dracut: Configuration directory '$confdir' not found." >&2 exit 1 fi if [[ -n $add_confdir ]]; then if [[ -d $add_confdir ]]; then : # Check if it exists under $confdir. elif [[ -d $confdir/$add_confdir ]]; then add_confdir="$confdir/$add_confdir" elif [[ -d $dracutbasedir/dracut.conf.d/$add_confdir ]]; then add_confdir="$dracutbasedir/dracut.conf.d/$add_confdir" else printf "%s\n" "dracut[F]: Configuration directory '$add_confdir' not found." >&2 exit 1 fi fi # source our config file if [[ -f $conffile ]]; then check_conf_file "$conffile" # shellcheck disable=SC1090 . "$conffile" fi # source our config dir for f in $(dropindirs_sort ".conf" "$confdir" ${add_confdir:+"$add_confdir"} "$dracutbasedir/dracut.conf.d"); do check_conf_file "$f" # shellcheck disable=SC1090 [[ -e $f ]] && . "$f" done # regenerate_all shouldn't be set in conf files regenerate_all=$regenerate_all_l if [[ $parallel_l == "yes" ]]; then parallel=yes fi if [[ $regenerate_all == "yes" ]]; then ret=0 if [[ $kernel ]]; then printf -- "--regenerate-all cannot be called with a kernel version\n" >&2 exit 1 fi if [[ $outfile ]]; then printf -- "--regenerate-all cannot be called with a image file\n" >&2 exit 1 fi ((len = ${#dracut_args[@]})) for ((i = 0; i < len; i++)); do case ${dracut_args[$i]} in --regenerate-all | --parallel) unset dracut_args["$i"] ;; esac done cd "$dracutsysrootdir"/lib/modules || exit 1 if [[ $parallel != "yes" ]]; then for i in *; do [[ -f $i/modules.dep ]] || [[ -f $i/modules.dep.bin ]] || continue "$dracut_cmd" --kver="$i" "${dracut_args[@]}" ((ret += $?)) done else for i in *; do [[ -f $i/modules.dep ]] || [[ -f $i/modules.dep.bin ]] || continue "$dracut_cmd" --kver="$i" "${dracut_args[@]}" & done while true; do wait -n wst=$? if [[ $wst == 127 ]]; then break else ((ret += wst)) fi done fi exit "$ret" fi if ! [[ $kernel ]]; then kernel=$(uname -r) fi DRACUT_PATH=${DRACUT_PATH:-/sbin /bin /usr/sbin /usr/bin} for i in $DRACUT_PATH; do rl=$i if [ -L "$dracutsysrootdir$i" ]; then rl=$(readlink -f "$dracutsysrootdir$i") fi rl="${rl#$dracutsysrootdir}" if [[ $NPATH != *:$rl* ]]; then NPATH+=":$rl" fi done [[ -z $dracutsysrootdir ]] && export PATH="${NPATH#:}" unset NPATH export SYSTEMCTL=${SYSTEMCTL:-systemctl} # these options add to the stuff in the config file ((${#add_dracutmodules_l[@]})) && add_dracutmodules+=" ${add_dracutmodules_l[*]} " ((${#omit_dracutmodules_l[@]})) && omit_dracutmodules+=" ${omit_dracutmodules_l[*]} " ((${#force_add_dracutmodules_l[@]})) && force_add_dracutmodules+=" ${force_add_dracutmodules_l[*]} " ((${#fscks_l[@]})) && fscks+=" ${fscks_l[*]} " ((${#add_fstab_l[@]})) && add_fstab+=" ${add_fstab_l[*]} " ((${#install_items_l[@]})) && install_items+=" ${install_items_l[*]} " ((${#install_optional_items_l[@]})) && install_optional_items+=" ${install_optional_items_l[*]} " ((${#hostonly_nics_l[@]})) && hostonly_nics+=" ${hostonly_nics_l[*]} " # these options override the stuff in the config file ((${#dracutmodules_l[@]})) && dracutmodules="${dracutmodules_l[*]}" ((${#filesystems_l[@]})) && filesystems="${filesystems_l[*]}" ((${#fw_dir_l[@]})) && fw_dir="${fw_dir_l[*]}" ((${#libdirs_l[@]})) && libdirs="${libdirs_l[*]}" [[ $stdloglvl_l ]] && stdloglvl=$stdloglvl_l [[ ! $stdloglvl ]] && stdloglvl=4 stdloglvl=$((stdloglvl + verbosity_mod_l)) ((stdloglvl > 6)) && stdloglvl=6 ((stdloglvl < 0)) && stdloglvl=0 [[ $drivers_dir_l ]] && drivers_dir=$drivers_dir_l [[ $do_strip_l ]] && do_strip=$do_strip_l [[ $do_strip ]] || do_strip=yes [[ $aggresive_strip_l ]] && aggresive_strip=$aggresive_strip_l [[ $do_hardlink_l ]] && do_hardlink=$do_hardlink_l [[ $do_hardlink ]] || do_hardlink=yes [[ $prefix_l ]] && prefix=$prefix_l [[ $prefix == "/" ]] && unset prefix [[ $hostonly_l ]] && hostonly=$hostonly_l [[ $hostonly_cmdline_l ]] && hostonly_cmdline=$hostonly_cmdline_l [[ $hostonly_mode_l ]] && hostonly_mode=$hostonly_mode_l [[ $hostonly == "yes" ]] && ! [[ $hostonly_cmdline ]] && hostonly_cmdline="yes" # shellcheck disable=SC2034 [[ $i18n_install_all_l ]] && i18n_install_all=$i18n_install_all_l # shellcheck disable=SC2034 [[ $persistent_policy_l ]] && persistent_policy=$persistent_policy_l [[ $use_fstab_l ]] && use_fstab=$use_fstab_l [[ $mdadmconf_l ]] && mdadmconf=$mdadmconf_l [[ $lvmconf_l ]] && lvmconf=$lvmconf_l [[ $dracutbasedir ]] || dracutbasedir="$dracutsysrootdir"/usr/lib/dracut [[ $fw_dir ]] || { fw_path_para=$(< /sys/module/firmware_class/parameters/path) fw_dir="${fw_path_para:+$dracutsysrootdir$fw_path_para:}$dracutsysrootdir/lib/firmware/updates/$kernel:$dracutsysrootdir/lib/firmware/updates:$dracutsysrootdir/lib/firmware/$kernel:$dracutsysrootdir/lib/firmware" } [[ $tmpdir_l ]] && tmpdir="$tmpdir_l" [[ $tmpdir ]] || tmpdir="$TMPDIR" [[ $tmpdir ]] || tmpdir="$dracutsysrootdir"/var/tmp [[ $INITRD_COMPRESS ]] && compress=$INITRD_COMPRESS [[ $compress_l ]] && compress=$compress_l [[ $squash_compress_l ]] && squash_compress=$squash_compress_l [[ $enhanced_cpio_l ]] && enhanced_cpio=$enhanced_cpio_l [[ $show_modules_l ]] && show_modules=$show_modules_l [[ $nofscks_l ]] && nofscks="yes" [[ $ro_mnt_l ]] && ro_mnt="yes" [[ $early_microcode_l ]] && early_microcode=$early_microcode_l [[ $early_microcode ]] || early_microcode=yes [[ $early_microcode_image_dir ]] || early_microcode_image_dir=('/boot') [[ $early_microcode_image_name ]] \ || early_microcode_image_name=('intel-uc.img' 'intel-ucode.img' 'amd-uc.img' 'amd-ucode.img' 'early_ucode.cpio' 'microcode.cpio') [[ $logfile_l ]] && logfile="$logfile_l" [[ $reproducible_l ]] && reproducible="$reproducible_l" [[ $loginstall_l ]] && loginstall="$loginstall_l" [[ $uefi_l ]] && uefi=$uefi_l [[ $uefi_stub_l ]] && uefi_stub="$uefi_stub_l" [[ $uefi_splash_image_l ]] && uefi_splash_image="$uefi_splash_image_l" [[ $kernel_image_l ]] && kernel_image="$kernel_image_l" [[ $sbat_l ]] && sbat="$sbat_l" [[ $machine_id_l ]] && machine_id="$machine_id_l" if ! [[ $outfile ]]; then if [[ $machine_id != "no" ]]; then if [[ -d "$dracutsysrootdir"/efi/Default ]] \ || [[ -d "$dracutsysrootdir"/boot/Default ]] \ || [[ -d "$dracutsysrootdir"/boot/efi/Default ]]; then MACHINE_ID="Default" elif [[ -f "$dracutsysrootdir"/etc/machine-id ]]; then read -r MACHINE_ID < "$dracutsysrootdir"/etc/machine-id else MACHINE_ID="Default" fi fi if [[ $uefi == "yes" ]]; then # shellcheck disable=SC2154 if [[ -n $uefi_secureboot_key && -z $uefi_secureboot_cert ]] || [[ -z $uefi_secureboot_key && -n $uefi_secureboot_cert ]]; then printf "%s\n" "dracut: Need 'uefi_secureboot_key' and 'uefi_secureboot_cert' both to be set." >&2 exit 1 fi if [[ -n $uefi_secureboot_key && -n $uefi_secureboot_cert ]] && ! command -v sbsign &> /dev/null; then printf "%s\n" "dracut: Need 'sbsign' to create a signed UEFI executable." >&2 exit 1 fi BUILD_ID=$(cat "$dracutsysrootdir"/etc/os-release "$dracutsysrootdir"/usr/lib/os-release \ | while read -r line || [[ $line ]]; do [[ $line =~ BUILD_ID\=* ]] && eval "$line" && echo "$BUILD_ID" && break done) if [[ -z $dracutsysrootdir ]]; then if [[ -d /efi ]] && mountpoint -q /efi; then efidir=/efi/EFI else efidir=/boot/EFI if [[ -d /boot/efi/EFI ]]; then efidir=/boot/efi/EFI fi fi else efidir=/boot/EFI if [[ -d $dracutsysrootdir/boot/efi/EFI ]]; then efidir=/boot/efi/EFI fi fi mkdir -p "$dracutsysrootdir$efidir/Linux" outfile="$dracutsysrootdir$efidir/Linux/linux-$kernel${MACHINE_ID:+-${MACHINE_ID}}${BUILD_ID:+-${BUILD_ID}}.efi" else if [[ -d "$dracutsysrootdir"/efi/loader/entries || -L "$dracutsysrootdir"/efi/loader/entries ]] \ && [[ $MACHINE_ID ]] \ && [[ -d "$dracutsysrootdir"/efi/${MACHINE_ID} || -L "$dracutsysrootdir"/efi/${MACHINE_ID} ]]; then outfile="$dracutsysrootdir/efi/${MACHINE_ID}/${kernel}/initrd" elif [[ -d "$dracutsysrootdir"/boot/loader/entries || -L "$dracutsysrootdir"/boot/loader/entries ]] \ && [[ $MACHINE_ID ]] \ && [[ -d "$dracutsysrootdir"/boot/${MACHINE_ID} || -L "$dracutsysrootdir"/boot/${MACHINE_ID} ]]; then outfile="$dracutsysrootdir/boot/${MACHINE_ID}/${kernel}/initrd" elif [[ -d "$dracutsysrootdir"/boot/efi/loader/entries || -L "$dracutsysrootdir"/boot/efi/loader/entries ]] \ && [[ $MACHINE_ID ]] \ && [[ -d "$dracutsysrootdir"/boot/efi/${MACHINE_ID} || -L "$dracutsysrootdir"/boot/efi/${MACHINE_ID} ]]; then outfile="$dracutsysrootdir/boot/efi/${MACHINE_ID}/${kernel}/initrd" elif [[ -f "$dracutsysrootdir"/lib/modules/${kernel}/initrd ]]; then outfile="$dracutsysrootdir/lib/modules/${kernel}/initrd" elif [[ -e $dracutsysrootdir/boot/vmlinuz-${kernel} ]]; then outfile="$dracutsysrootdir/boot/initramfs-${kernel}.img" elif [[ -z $dracutsysrootdir ]] \ && [[ $MACHINE_ID ]] \ && mountpoint -q /efi; then outfile="/efi/${MACHINE_ID}/${kernel}/initrd" elif [[ -z $dracutsysrootdir ]] \ && [[ $MACHINE_ID ]] \ && mountpoint -q /boot/efi; then outfile="/boot/efi/${MACHINE_ID}/${kernel}/initrd" else outfile="$dracutsysrootdir/boot/initramfs-${kernel}.img" fi fi fi # eliminate IFS hackery when messing with fw_dir export DRACUT_FIRMWARE_PATH=${fw_dir// /:} fw_dir=${fw_dir//:/ } # check for logfile and try to create one if it doesn't exist if [[ -n $logfile ]]; then if [[ ! -f $logfile ]]; then if touch "$logfile"; then printf "%s\n" "dracut: touch $logfile failed." >&2 fi fi fi # handle compression options. DRACUT_COMPRESS_BZIP2=${DRACUT_COMPRESS_BZIP2:-bzip2} DRACUT_COMPRESS_LBZIP2=${DRACUT_COMPRESS_LBZIP2:-lbzip2} DRACUT_COMPRESS_LZMA=${DRACUT_COMPRESS_LZMA:-lzma} DRACUT_COMPRESS_XZ=${DRACUT_COMPRESS_XZ:-xz} DRACUT_COMPRESS_GZIP=${DRACUT_COMPRESS_GZIP:-gzip} DRACUT_COMPRESS_PIGZ=${DRACUT_COMPRESS_PIGZ:-pigz} DRACUT_COMPRESS_LZOP=${DRACUT_COMPRESS_LZOP:-lzop} DRACUT_COMPRESS_ZSTD=${DRACUT_COMPRESS_ZSTD:-zstd} DRACUT_COMPRESS_LZ4=${DRACUT_COMPRESS_LZ4:-lz4} DRACUT_COMPRESS_CAT=${DRACUT_COMPRESS_CAT:-cat} if [[ $_no_compress_l == "$DRACUT_COMPRESS_CAT" ]]; then compress="$DRACUT_COMPRESS_CAT" fi [[ $hostonly == yes ]] && hostonly="-h" [[ $hostonly != "-h" ]] && unset hostonly case $hostonly_mode in '') [[ $hostonly ]] && hostonly_mode="sloppy" ;; sloppy | strict) if [[ ! $hostonly ]]; then unset hostonly_mode fi ;; *) printf "%s\n" "dracut: Invalid hostonly mode '$hostonly_mode'." >&2 exit 1 ;; esac [[ $reproducible == yes ]] && DRACUT_REPRODUCIBLE=1 case "${drivers_dir}" in '' | *lib/modules/${kernel} | *lib/modules/${kernel}/) ;; *) [[ "$DRACUT_KMODDIR_OVERRIDE" ]] || { printf "%s\n" 'dracut: -k/--kmoddir path must contain "lib/modules" as a parent of your kernel module directory,' printf "%s\n" "dracut: or modules may not be placed in the correct location inside the initramfs." printf "%s\n" "dracut: was given: ${drivers_dir}" printf "%s\n" "dracut: expected: $(dirname "${drivers_dir}")/lib/modules/${kernel}" printf "%s\n" "dracut: Please move your modules into the correct directory structure and pass the new location," printf "%s\n" "dracut: or set DRACUT_KMODDIR_OVERRIDE=1 to ignore this check." exit 1 } ;; esac # shellcheck disable=SC2155 readonly TMPDIR="$(realpath -e "$tmpdir")" [ -d "$TMPDIR" ] || { printf "%s\n" "dracut: Invalid tmpdir '$tmpdir'." >&2 exit 1 } if findmnt --raw -n --target "$tmpdir" --output=options | grep -q noexec; then [[ $debug == yes ]] && printf "%s\n" "dracut: Tmpdir '$tmpdir' is mounted with 'noexec'." noexec=1 fi # shellcheck disable=SC2155 readonly DRACUT_TMPDIR="$(mktemp -p "$TMPDIR/" -d -t dracut.XXXXXX)" [ -d "$DRACUT_TMPDIR" ] || { printf "%s\n" "dracut: mktemp -p '$TMPDIR/' -d -t dracut.XXXXXX failed." >&2 exit 1 } # Cache file used to optimize get_maj_min() declare -x -r get_maj_min_cache_file="${DRACUT_TMPDIR}/majmin_cache" : > "$get_maj_min_cache_file" # clean up after ourselves no matter how we die. trap ' ret=$?; [[ $keep ]] && echo "Not removing $DRACUT_TMPDIR." >&2 || { [[ $DRACUT_TMPDIR ]] && rm -rf -- "$DRACUT_TMPDIR"; }; if [[ ${FSFROZEN} ]]; then fsfreeze -u "${FSFROZEN}" fi exit $ret; ' EXIT # clean up after ourselves no matter how we die. trap 'exit 1;' SIGINT readonly initdir="${DRACUT_TMPDIR}/initramfs" mkdir -p "$initdir" # shellcheck disable=SC2154 if [[ $early_microcode == yes ]] || { [[ $acpi_override == yes ]] && [[ -d $acpi_table_dir ]]; }; then readonly early_cpio_dir="${DRACUT_TMPDIR}/earlycpio" mkdir "$early_cpio_dir" fi [[ "$dracutsysrootdir" ]] || [[ "$noexec" ]] || export DRACUT_RESOLVE_LAZY="1" if [[ $print_cmdline ]]; then stdloglvl=0 sysloglvl=0 fileloglvl=0 kmsgloglvl=0 fi if [[ -f $dracutbasedir/dracut-version.sh ]]; then # shellcheck source=./dracut-version.sh . "$dracutbasedir"/dracut-version.sh fi if systemd-detect-virt -c &> /dev/null; then export DRACUT_NO_MKNOD=1 DRACUT_NO_XATTR=1 if [[ $hostonly ]]; then printf "%s\n" "dracut: WARNING: running in hostonly mode in a container!!" fi fi if [[ -f $dracutbasedir/dracut-init.sh ]]; then # shellcheck source=./dracut-init.sh . "$dracutbasedir"/dracut-init.sh else printf "%s\n" "dracut: Cannot find $dracutbasedir/dracut-init.sh." >&2 printf "%s\n" "dracut: Are you running from a git checkout?" >&2 printf "%s\n" "dracut: Try passing -l as an argument to $dracut_cmd" >&2 exit 1 fi if [[ $enhanced_cpio == "yes" ]]; then enhanced_cpio="$dracutbasedir/dracut-cpio" if [[ -x $enhanced_cpio ]]; then # align based on statfs optimal transfer size cpio_align=$(stat --file-system -c "%s" -- "$initdir") else dinfo "--enhanced-cpio ignored due to lack of dracut-cpio" unset enhanced_cpio fi else unset enhanced_cpio fi # shellcheck disable=SC2154 if [[ $no_kernel != yes ]] && ! [[ -d $srcmods ]]; then printf "%s\n" "dracut: Cannot find module directory $srcmods" >&2 printf "%s\n" "dracut: and --no-kernel was not specified" >&2 exit 1 fi if ! [[ $print_cmdline ]]; then inst "$DRACUT_TESTBIN" if ! $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${dracutsysrootdir:+-r "$dracutsysrootdir"} -R "$DRACUT_TESTBIN" &> /dev/null; then unset DRACUT_RESOLVE_LAZY export DRACUT_RESOLVE_DEPS=1 fi rm -fr -- "${initdir:?}"/* fi dracutfunctions=$dracutbasedir/dracut-functions.sh export dracutfunctions ((${#drivers_l[@]})) && drivers="${drivers_l[*]}" drivers=${drivers/-/_} ((${#add_drivers_l[@]})) && add_drivers+=" ${add_drivers_l[*]} " add_drivers=${add_drivers/-/_} ((${#force_drivers_l[@]})) && force_drivers+=" ${force_drivers_l[*]} " force_drivers=${force_drivers/-/_} ((${#omit_drivers_l[@]})) && omit_drivers+=" ${omit_drivers_l[*]} " omit_drivers=${omit_drivers/-/_} ((${#kernel_cmdline_l[@]})) && kernel_cmdline+=" ${kernel_cmdline_l[*]} " omit_drivers_corrected="" for d in $omit_drivers; do [[ " $drivers $add_drivers " == *\ $d\ * ]] && continue [[ " $drivers $force_drivers " == *\ $d\ * ]] && continue omit_drivers_corrected+="^$d$|" done omit_drivers="${omit_drivers_corrected%|}" unset omit_drivers_corrected # prepare args for logging for ((i = 0; i < ${#dracut_args[@]}; i++)); do [[ ${dracut_args[$i]} == *\ * ]] \ && dracut_args[$i]="\"${dracut_args[$i]}\"" #" keep vim happy done dinfo "Executing: $dracut_cmd ${dracut_args[*]}" [[ $do_list == yes ]] && { for mod in "$dracutbasedir"/modules.d/*; do [[ -d $mod ]] || continue [[ -e $mod/install || -e $mod/installkernel || -e $mod/module-setup.sh ]] || continue printf "%s\n" "${mod##*/??}" done exit 0 } # This is kinda legacy -- eventually it should go away. case $dracutmodules in "" | auto) dracutmodules="all" ;; esac abs_outfile=$(readlink -f "$outfile") && outfile="$abs_outfile" [[ -d $dracutsysrootdir$systemdutildir ]] \ || systemdutildir=$(pkg-config systemd --variable=systemdutildir 2> /dev/null) if ! [[ -d $dracutsysrootdir$systemdutildir ]]; then [[ -e $dracutsysrootdir/lib/systemd/systemd-udevd ]] && systemdutildir=/lib/systemd [[ -e $dracutsysrootdir/usr/lib/systemd/systemd-udevd ]] && systemdutildir=/usr/lib/systemd fi [[ -d $dracutsysrootdir$systemdutilconfdir ]] \ || systemdutilconfdir=$(pkg-config systemd --variable=systemdutilconfdir 2> /dev/null) [[ -d $dracutsysrootdir$systemdutilconfdir ]] || systemdutilconfdir=/etc/systemd if [[ $no_kernel != yes ]] && [[ -d $srcmods ]]; then if ! [[ -f $srcmods/modules.dep ]]; then if [[ -n "$(find "$srcmods" -name '*.ko*')" ]]; then dfatal "$srcmods/modules.dep is missing. Did you run depmod?" exit 1 else dwarn "$srcmods/modules.dep is missing. Did you run depmod?" fi fi fi if [[ ! $print_cmdline ]]; then if [[ -f $outfile && ! $force ]]; then dfatal "Will not override existing initramfs ($outfile) without --force" exit 1 fi outdir=${outfile%/*} [[ $outdir ]] || outdir="/" if [[ ! -d $outdir ]]; then dfatal "Can't write to $outdir: Directory $outdir does not exist or is not accessible." exit 1 elif [[ ! -w $outdir ]]; then dfatal "No permission to write to $outdir." exit 1 elif [[ -f $outfile && ! -w $outfile ]]; then dfatal "No permission to write $outfile." exit 1 fi if [[ $loginstall ]]; then if ! mkdir -p "$loginstall"; then dfatal "Could not create directory to log installed files to '$loginstall'." exit 1 fi loginstall=$(readlink -f "$loginstall") fi if [[ $uefi == yes ]]; then if ! command -v objcopy &> /dev/null; then dfatal "Need 'objcopy' to create a UEFI executable" exit 1 fi unset EFI_MACHINE_TYPE_NAME case $(uname -m) in x86_64) EFI_MACHINE_TYPE_NAME=x64 ;; i?86) EFI_MACHINE_TYPE_NAME=ia32 ;; aarch64) EFI_MACHINE_TYPE_NAME=aa64 ;; *) dfatal "Architecture '$(uname -m)' not supported to create a UEFI executable" exit 1 ;; esac if ! [[ -s $uefi_stub ]]; then uefi_stub="$dracutsysrootdir${systemdutildir}/boot/efi/linux${EFI_MACHINE_TYPE_NAME}.efi.stub" fi if ! [[ -s $uefi_stub ]]; then dfatal "Can't find a uefi stub '$uefi_stub' to create a UEFI executable" exit 1 fi if ! [[ $kernel_image ]]; then for kernel_image in "$dracutsysrootdir/lib/modules/$kernel/vmlinuz" "$dracutsysrootdir/boot/vmlinuz-$kernel"; do [[ -s $kernel_image ]] || continue break done fi if ! [[ -s $kernel_image ]]; then dfatal "Can't find a kernel image '$kernel_image' to create a UEFI executable" exit 1 fi fi fi if [[ $acpi_override == yes ]] && ! (check_kernel_config CONFIG_ACPI_TABLE_UPGRADE || check_kernel_config CONFIG_ACPI_INITRD_TABLE_OVERRIDE); then dwarn "Disabling ACPI override, because kernel does not support it. CONFIG_ACPI_INITRD_TABLE_OVERRIDE!=y or CONFIG_ACPI_TABLE_UPGRADE!=y" unset acpi_override fi if [[ $early_microcode == yes ]]; then if [[ $hostonly ]]; then if [[ $(get_cpu_vendor) == "AMD" || $(get_cpu_vendor) == "Intel" ]]; then check_kernel_config CONFIG_MICROCODE || unset early_microcode else unset early_microcode fi else ! check_kernel_config CONFIG_MICROCODE \ && unset early_microcode fi # Do not complain on non-x86 architectures as it makes no sense case $(uname -m) in x86_64 | i?86) [[ $early_microcode != yes ]] \ && dwarn "Disabling early microcode, because kernel does not support it. CONFIG_MICROCODE!=y" ;; *) ;; esac fi # Need to be able to have non-root users read stuff (rpcbind etc) chmod 755 "$initdir" if [[ $hostonly ]]; then for i in /sys /proc /run /dev; do if ! findmnt --target "$i" &> /dev/null; then dwarning "Turning off host-only mode: '$i' is not mounted!" unset hostonly fi done fi declare -A host_fs_types for line in "${fstab_lines[@]}"; do # shellcheck disable=SC2086 set -- $line dev="$1" #dev mp fs fsopts case "$dev" in UUID=*) dev=$(blkid -l -t "UUID=${dev#UUID=}" -o device) ;; LABEL=*) dev=$(blkid -l -t "LABEL=${dev#LABEL=}" -o device) ;; PARTUUID=*) dev=$(blkid -l -t "PARTUUID=${dev#PARTUUID=}" -o device) ;; PARTLABEL=*) dev=$(blkid -l -t "PARTLABEL=${dev#PARTLABEL=}" -o device) ;; esac [ -z "$dev" ] && dwarn "Bad fstab entry $*" && continue if [[ $3 == btrfs ]]; then for mp in $(findmnt --source "$1" -o TARGET -n); do for i in $(btrfs_devs "$mp"); do push_host_devs "$i" done done elif [[ $3 == zfs ]]; then for mp in $(zfs_devs "$1"); do push_host_devs "$mp" done fi push_host_devs "$dev" host_fs_types["$dev"]="$3" done for f in $add_fstab; do [[ -e $f ]] || continue while read -r dev rest || [ -n "$dev" ]; do push_host_devs "$dev" done < "$f" done for dev in $add_device; do push_host_devs "$dev" done if ((${#add_device_l[@]})); then add_device+=" ${add_device_l[*]} " push_host_devs "${add_device_l[@]}" fi if [[ $hostonly ]] && [[ $hostonly_default_device != "no" ]]; then # in hostonly mode, determine all devices, which have to be accessed # and examine them for filesystem types for mp in \ "/" \ "/etc" \ "/bin" \ "/sbin" \ "/lib" \ "/lib64" \ "/usr" \ "/usr/bin" \ "/usr/sbin" \ "/usr/lib" \ "/usr/lib64" \ "/boot" \ "/boot/efi" \ "/boot/zipl"; do mp=$(readlink -f "$dracutsysrootdir$mp") mountpoint "$mp" > /dev/null 2>&1 || continue _dev=$(find_block_device "$mp") _bdev=$(readlink -f "/dev/block/$_dev") [[ -b $_bdev ]] && _dev=$_bdev [[ $mp == "/" ]] && root_devs+=("$_dev") push_host_devs "$_dev" if [[ $(find_mp_fstype "$mp") == btrfs ]]; then for i in $(btrfs_devs "$mp"); do [[ $mp == "/" ]] && root_devs+=("$i") push_host_devs "$i" done elif [[ $(find_mp_fstype "$mp") == zfs ]]; then for i in $(zfs_devs "$(findmnt -n -o SOURCE "$mp")"); do [[ $mp == "/" ]] && root_devs+=("$i") push_host_devs "$i" done fi done # TODO - with sysroot, /proc/swaps is not relevant if [[ -f /proc/swaps ]] && [[ -f $dracutsysrootdir/etc/fstab ]]; then while read -r dev type rest || [ -n "$dev" ]; do [[ -b $dev ]] || continue [[ $type == "partition" ]] || continue while read -r _d _m _t _o _ || [ -n "$_d" ]; do [[ $_d == \#* ]] && continue [[ $_d ]] || continue [[ $_t != "swap" ]] && continue [[ $_m != "swap" ]] && [[ $_m != "none" ]] && continue [[ $_o == *noauto* ]] && continue _d=$(expand_persistent_dev "$_d") [[ $_d -ef $dev ]] || continue if [[ -f $dracutsysrootdir/etc/crypttab ]]; then while read -r _mapper _ _p _o || [ -n "$_mapper" ]; do [[ $_mapper == \#* ]] && continue [[ $_d -ef /dev/mapper/"$_mapper" ]] || continue [[ "$_o" ]] || _o="$_p" # skip entries with password files [[ $_p == /* ]] && [[ -f $_p ]] && continue 2 # skip mkswap swap [[ $_o == *swap* ]] && continue 2 done < "$dracutsysrootdir"/etc/crypttab fi _dev="$(readlink -f "$dev")" push_host_devs "$_dev" swap_devs+=("$_dev") break done < "$dracutsysrootdir"/etc/fstab done < /proc/swaps fi # collect all "x-initrd.mount" entries from /etc/fstab if [[ -f $dracutsysrootdir/etc/fstab ]]; then while read -r _d _m _t _o _ || [ -n "$_d" ]; do [[ $_d == \#* ]] && continue [[ $_d ]] || continue [[ $_o != *x-initrd.mount* ]] && continue _dev=$(expand_persistent_dev "$_d") _dev="$(readlink -f "$_dev")" [[ -b $_dev ]] || continue push_host_devs "$_dev" if [[ $_t == btrfs ]]; then for i in $(btrfs_devs "$_m"); do push_host_devs "$i" done elif [[ $_t == zfs ]]; then for i in $(zfs_devs "$_d"); do push_host_devs "$i" done fi done < "$dracutsysrootdir"/etc/fstab fi fi unset m unset rest _get_fs_type() { [[ $1 ]] || return if [[ -b /dev/block/$1 ]]; then ID_FS_TYPE=$(get_fs_env "/dev/block/$1") && host_fs_types["$(readlink -f "/dev/block/$1")"]="$ID_FS_TYPE" return 1 fi if [[ -b $1 ]]; then ID_FS_TYPE=$(get_fs_env "$1") && host_fs_types["$(readlink -f "$1")"]="$ID_FS_TYPE" return 1 fi if fstype=$(find_dev_fstype "$1"); then host_fs_types["$1"]="$fstype" return 1 fi return 1 } for dev in "${host_devs[@]}"; do _get_fs_type "$dev" check_block_and_slaves_all _get_fs_type "$(get_maj_min "$dev")" done for dev in "${!host_fs_types[@]}"; do [[ ${host_fs_types[$dev]} == "reiserfs" ]] || [[ ${host_fs_types[$dev]} == "xfs" ]] || continue rootopts=$(find_dev_fsopts "$dev") if [[ ${host_fs_types[$dev]} == "reiserfs" ]]; then journaldev=$(fs_get_option "$rootopts" "jdev") elif [[ ${host_fs_types[$dev]} == "xfs" ]]; then journaldev=$(fs_get_option "$rootopts" "logdev") fi if [[ $journaldev ]]; then dev="$(readlink -f "$dev")" push_host_devs "$dev" _get_fs_type "$dev" check_block_and_slaves_all _get_fs_type "$(get_maj_min "$dev")" fi done [[ -d $dracutsysrootdir$dbus ]] \ || dbus=$(pkg-config dbus --variable=dbus 2> /dev/null) [[ -d $dracutsysrootdir$dbus ]] || dbus=/usr/share/dbus-1 [[ -d $dracutsysrootdir$dbusconfdir ]] \ || dbusconfdir=$(pkg-config dbus --variable=dbusconfdir 2> /dev/null) [[ -d $dracutsysrootdir$dbusconfdir ]] || dbusconfdir=/etc/dbus-1 [[ -d $dracutsysrootdir$dbusinterfaces ]] \ || dbusinterfaces=$(pkg-config dbus --variable=dbusinterfaces 2> /dev/null) [[ -d $dracutsysrootdir$dbusinterfaces ]] || dbusinterfaces=${dbus}/interfaces [[ -d $dracutsysrootdir$dbusinterfacesconfdir ]] \ || dbusinterfacesconfdir=$(pkg-config dbus --variable=dbusinterfacesconfdir 2> /dev/null) [[ -d $dracutsysrootdir$dbusinterfacesconfdir ]] || dbusinterfacesconfdir=${dbusconfdir}/interfaces [[ -d $dracutsysrootdir$dbusservices ]] \ || dbusservices=$(pkg-config dbus --variable=dbusservices 2> /dev/null) [[ -d $dracutsysrootdir$dbusservices ]] || dbusservices=${dbus}/services [[ -d $dracutsysrootdir$dbusservicesconfdir ]] \ || dbusservicesconfdir=$(pkg-config dbus --variable=dbusservicesconfdir 2> /dev/null) [[ -d $dracutsysrootdir$dbusservicesconfdir ]] || dbusservicesconfdir=${dbusconfdir}/services [[ -d $dracutsysrootdir$dbussession ]] \ || dbussession=$(pkg-config dbus --variable=dbussession 2> /dev/null) [[ -d $dracutsysrootdir$dbussession ]] || dbussession=${dbus}/session.d [[ -d $dracutsysrootdir$dbussessionconfdir ]] \ || dbussessionconfdir=$(pkg-config dbus --variable=dbussessionconfdir 2> /dev/null) [[ -d $dracutsysrootdir$dbussessionconfdir ]] || dbussessionconfdir=${dbusconfdir}/session.d [[ -d $dracutsysrootdir$dbussystem ]] \ || dbussystem=$(pkg-config dbus --variable=dbussystem 2> /dev/null) [[ -d $dracutsysrootdir$dbussystem ]] || dbussystem=${dbus}/system.d [[ -d $dracutsysrootdir$dbussystemconfdir ]] \ || dbussystemconfdir=$(pkg-config dbus --variable=dbussystemconfdir 2> /dev/null) [[ -d $dracutsysrootdir$dbussystemconfdir ]] || dbussystemconfdir=${dbusconfdir}/system.d [[ -d $dracutsysrootdir$dbussystemservices ]] \ || dbussystemservices=$(pkg-config dbus --variable=dbussystemservices 2> /dev/null) [[ -d $dracutsysrootdir$dbussystemservices ]] || dbussystemservices=${dbus}/system-services [[ -d $dracutsysrootdir$dbussystemservicesconfdir ]] \ || dbussystemservicesconfdir=$(pkg-config dbus --variable=dbussystemservicesconfdir 2> /dev/null) [[ -d $dracutsysrootdir$dbussystemservicesconfdir ]] || dbussystemservicesconfdir=${dbusconfdir}/system-services [[ -d $dracutsysrootdir$udevdir ]] \ || udevdir="$(pkg-config udev --variable=udevdir 2> /dev/null)" if ! [[ -d $dracutsysrootdir$udevdir ]]; then [[ -e $dracutsysrootdir/lib/udev/ata_id ]] && udevdir=/lib/udev [[ -e $dracutsysrootdir/usr/lib/udev/ata_id ]] && udevdir=/usr/lib/udev fi [[ -d $dracutsysrootdir$udevconfdir ]] \ || udevconfdir=$(pkg-config udev --variable=udevconfdir 2> /dev/null) [[ -d $dracutsysrootdir$udevconfdir ]] || udevconfdir=/etc/udev [[ -d $dracutsysrootdir$udevrulesdir ]] \ || udevrulesdir=$(pkg-config udev --variable=udevrulesdir 2> /dev/null) [[ -d $dracutsysrootdir$udevrulesdir ]] || udevrulesdir=${udevdir}/rules.d [[ -d $dracutsysrootdir$udevrulesconfdir ]] \ || udevrulesconfdir=$(pkg-config udev --variable=udevrulesconfdir 2> /dev/null) [[ -d $dracutsysrootdir$udevrulesconfdir ]] || udevrulesconfdir=${udevconfdir}/rules.d [[ -d $dracutsysrootdir$sysctld ]] \ || sysctld=$(pkg-config systemd --variable=sysctld 2> /dev/null) [[ -d $dracutsysrootdir$sysctld ]] || sysctld=/usr/lib/sysctl.d [[ -d $dracutsysrootdir$sysctlconfdir ]] \ || sysctlconfdir=$(pkg-config systemd --variable=sysctlconfdir 2> /dev/null) [[ -d $dracutsysrootdir$sysctlconfdir ]] || sysctlconfdir=/etc/sysctl.d [[ -d $dracutsysrootdir$environment ]] \ || environment=$(pkg-config systemd --variable=environment 2> /dev/null) [[ -d $dracutsysrootdir$environment ]] || environment=/usr/lib/environment.d [[ -d $dracutsysrootdir$environmentconfdir ]] \ || environmentconfdir=$(pkg-config systemd --variable=environmentconfdir 2> /dev/null) [[ -d $dracutsysrootdir$environmentconfdir ]] || environmentconfdir=/etc/environment.d [[ -d $dracutsysrootdir$systemdcatalog ]] \ || systemdcatalog=$(pkg-config systemd --variable=systemdcatalog 2> /dev/null) [[ -d $dracutsysrootdir$systemdcatalog ]] || systemdcatalog=${systemdutildir}/catalog [[ -d $dracutsysrootdir$modulesload ]] \ || modulesload=$(pkg-config systemd --variable=modulesload 2> /dev/null) [[ -d $dracutsysrootdir$modulesload ]] || modulesload=/usr/lib/modules-load.d [[ -d $dracutsysrootdir$modulesloadconfdir ]] \ || modulesloadconfdir=$(pkg-config systemd --variable=modulesloadconfdir 2> /dev/null) [[ -d $dracutsysrootdir$modulesloadconfdir ]] || modulesloadconfdir=/etc/modules-load.d [[ -d $dracutsysrootdir$systemdnetwork ]] \ || systemdnetwork=$(pkg-config systemd --variable=systemdnetwork 2> /dev/null) [[ -d $dracutsysrootdir$systemdnetwork ]] || systemdnetwork=${systemdutildir}/network [[ -d $dracutsysrootdir$systemdnetworkconfdir ]] \ || systemdnetworkconfdir=$(pkg-config systemd --variable=systemdnetworkconfdir 2> /dev/null) [[ -d $dracutsysrootdir$systemdnetworkconfdir ]] || systemdnetworkconfdir=${systemdutilconfdir}/network [[ -d $dracutsysrootdir$systemdntpunits ]] \ || systemdntpunits=$(pkg-config systemd --variable=systemdntpunits 2> /dev/null) [[ -d $dracutsysrootdir$systemdntpunits ]] || systemdntpunits=${systemdutildir}/ntp-units.d [[ -d $dracutsysrootdir$systemdntpunitsconfdir ]] \ || systemdntpunitsconfdir=$(pkg-config systemd --variable=systemdntpunitsconfdir 2> /dev/null) [[ -d $dracutsysrootdir$systemdntpunitsconfdir ]] || systemdntpunitsconfdir=${systemdutilconfdir}/ntp-units.d [[ -d $dracutsysrootdir$systemdportable ]] \ || systemdportable=$(pkg-config systemd --variable=systemdportable 2> /dev/null) [[ -d $dracutsysrootdir$systemdportable ]] || systemdportable=${systemdutildir}/portable [[ -d $dracutsysrootdir$systemdportableconfdir ]] \ || systemdportableconfdir=$(pkg-config systemd --variable=systemdportableconfdir 2> /dev/null) [[ -d "$dracutsysrootdir$systemdportableconfdir" ]] || systemdportableconfdir=${systemdutilconfdir}/portable [[ -d $dracutsysrootdir$systemdsystemunitdir ]] \ || systemdsystemunitdir=$(pkg-config systemd --variable=systemdsystemunitdir 2> /dev/null) [[ -d "$dracutsysrootdir$systemdsystemunitdir" ]] || systemdsystemunitdir=${systemdutildir}/system [[ -d $dracutsysrootdir$systemduser ]] \ || systemduser=$(pkg-config systemd --variable=systemduser 2> /dev/null) [[ -d $dracutsysrootdir$systemduser ]] || systemduser=${systemdutildir}/user [[ -d $dracutsysrootdir$systemduserconfdir ]] \ || systemduserconfdir=$(pkg-config systemd --variable=systemduserconfdir 2> /dev/null) [[ -d $dracutsysrootdir$systemduserconfdir ]] || systemduserconfdir=${systemdutilconfdir}/user [[ -d $dracutsysrootdir$systemdsystemconfdir ]] \ || systemdsystemconfdir=$(pkg-config systemd --variable=systemdsystemconfdir 2> /dev/null) [[ -d $dracutsysrootdir$systemdsystemconfdir ]] || systemdsystemconfdir=/etc/systemd/system [[ -d $dracutsysrootdir$sysusers ]] \ || sysusers=$(pkg-config systemd --variable=sysusers 2> /dev/null) [[ -d $dracutsysrootdir$sysusers ]] || sysusers=/usr/lib/sysusers.d [[ -d $dracutsysrootdir$sysusersconfdir ]] \ || sysusersconfdir=$(pkg-config systemd --variable=sysusersconfdir 2> /dev/null) [[ -d $dracutsysrootdir$sysusersconfdir ]] || sysusersconfdir=/etc/sysusers.d [[ -d $dracutsysrootdir$tmpfilesdir ]] \ || tmpfilesdir=$(pkg-config systemd --variable=tmpfilesdir 2> /dev/null) if ! [[ -d $dracutsysrootdir$tmpfilesdir ]]; then [[ -d $dracutsysrootdir/lib/tmpfiles.d ]] && tmpfilesdir=/lib/tmpfiles.d [[ -d $dracutsysrootdir/usr/lib/tmpfiles.d ]] && tmpfilesdir=/usr/lib/tmpfiles.d fi [[ -d $dracutsysrootdir$tmpfilesconfdir ]] \ || tmpfilesconfdir=$(pkg-config systemd --variable=tmpfilesconfdir 2> /dev/null) [[ -d $dracutsysrootdir$tmpfilesconfdir ]] || tmpfilesconfdir=/etc/tmpfiles.d [[ -d $dracutsysrootdir$depmodd ]] \ || depmodd=$(pkg-config libkmod --variable=depmodd 2> /dev/null) [[ -d $dracutsysrootdir$depmodd ]] || depmodd=/usr/lib/depmod.d [[ -d $dracutsysrootdir$depmodconfdir ]] \ || depmodconfdir=$(pkg-config libkmod --variable=depmodconfdir 2> /dev/null) [[ -d $dracutsysrootdir$depmodconfdir ]] || depmodconfdir=/etc/depmod.d export initdir dracutbasedir \ dracutmodules force_add_dracutmodules add_dracutmodules omit_dracutmodules \ mods_to_load \ fw_dir drivers_dir debug no_kernel kernel_only \ omit_drivers mdadmconf lvmconf root_devs \ use_fstab fstab_lines libdirs fscks nofscks ro_mnt \ stdloglvl sysloglvl fileloglvl kmsgloglvl logfile \ debug host_fs_types host_devs swap_devs sshkey add_fstab \ DRACUT_VERSION udevdir udevconfdir udevrulesdir udevrulesconfdir \ prefix filesystems drivers dbus dbusconfdir dbusinterfaces \ dbusinterfacesconfdir dbusservices dbusservicesconfdir dbussession \ dbussessionconfdir dbussystem dbussystemconfdir dbussystemservices \ dbussystemservicesconfdir environment environmentconfdir modulesload \ modulesloadconfdir sysctld sysctlconfdir sysusers sysusersconfdir \ systemdutildir systemdutilconfdir systemdcatalog systemdnetwork \ systemdnetworkconfdir systemdntpunits systemdntpunitsconfdir \ systemdportable systemdportableconfdir systemdsystemunitdir \ systemdsystemconfdir systemduser systemduserconfdir \ hostonly_cmdline loginstall tmpfilesdir tmpfilesconfdir depmodd \ depmodconfdir mods_to_load="" # check all our modules to see if they should be sourced. # This builds a list of modules that we will install next. for_each_module_dir check_module for_each_module_dir check_mount dracut_module_included "fips" && export DRACUT_FIPS_MODE=1 do_print_cmdline() { local -A _mods_to_print for i in $modules_loaded $mods_to_load; do _mods_to_print[$i]=1 done # source our modules. for moddir in "$dracutbasedir/modules.d"/[0-9][0-9]*; do _d_mod=${moddir##*/} _d_mod=${_d_mod#[0-9][0-9]} [[ ${_mods_to_print[$_d_mod]} ]] || continue module_cmdline "$_d_mod" "$moddir" done unset moddir } if [[ $print_cmdline ]]; then do_print_cmdline printf "\n" exit 0 fi # Create some directory structure first # shellcheck disable=SC2174 [[ $prefix ]] && mkdir -m 0755 -p "${initdir}${prefix}" # shellcheck disable=SC2174 [[ -L $dracutsysrootdir/lib ]] || mkdir -m 0755 -p "${initdir}${prefix}/lib" [[ $prefix ]] && ln -sfn "${prefix#/}/lib" "$initdir/lib" if [[ $prefix ]]; then for d in bin etc lib sbin tmp usr var $libdirs; do d=${d#/} [[ $d == */* ]] && continue ln -sfn "${prefix#/}/${d#/}" "$initdir/$d" done fi if [[ $kernel_only != yes ]]; then for d in usr usr/bin usr/sbin bin etc lib sbin tmp var var/tmp $libdirs; do d=${d#/} [[ -e "${initdir}${prefix}/$d" ]] && continue if [ -L "/$d" ]; then inst_symlink "/$d" "${prefix}/$d" else # shellcheck disable=SC2174 mkdir -m 0755 -p "${initdir}${prefix}/$d" fi done for d in dev proc sys sysroot root run; do if [ -L "/$d" ]; then inst_symlink "/$d" else # shellcheck disable=SC2174 mkdir -m 0755 -p "$initdir/$d" fi done ln -sfn ../run "$initdir/var/run" ln -sfn ../run/lock "$initdir/var/lock" else for d in lib "$libdirs"; do [[ -e "${initdir}${prefix}/$d" ]] && continue if [ -h "/$d" ]; then inst "/$d" "${prefix}/$d" else # shellcheck disable=SC2174 mkdir -m 0755 -p "${initdir}${prefix}/$d" fi done fi if [[ $kernel_only != yes ]]; then mkdir -p "${initdir}/etc/cmdline.d" # shellcheck disable=SC2174 mkdir -m 0755 -p "${initdir}"/lib "${initdir}"/lib/dracut "${initdir}"/lib/dracut/hooks # shellcheck disable=SC2154 for _d in $hookdirs; do # shellcheck disable=SC2174 mkdir -m 0755 -p "${initdir}/lib/dracut/hooks/$_d" done if [[ $EUID == "0" ]] && ! [[ $DRACUT_NO_MKNOD ]]; then [[ -c ${initdir}/dev/null ]] || mknod "${initdir}"/dev/null c 1 3 [[ -c ${initdir}/dev/kmsg ]] || mknod "${initdir}"/dev/kmsg c 1 11 [[ -c ${initdir}/dev/console ]] || mknod "${initdir}"/dev/console c 5 1 [[ -c ${initdir}/dev/random ]] || mknod "${initdir}"/dev/random c 1 8 [[ -c ${initdir}/dev/urandom ]] || mknod "${initdir}"/dev/urandom c 1 9 fi fi _isize=0 #initramfs size modules_loaded=" " # source our modules. for moddir in "$dracutbasedir/modules.d"/[0-9][0-9]*; do _d_mod=${moddir##*/} _d_mod=${_d_mod#[0-9][0-9]} [[ $mods_to_load == *\ $_d_mod\ * ]] || continue if [[ $show_modules == yes ]]; then printf "%s\n" "$_d_mod" else dinfo "*** Including module: $_d_mod ***" fi if [[ $kernel_only == yes ]]; then module_installkernel "$_d_mod" "$moddir" || { dfatal "installkernel failed in module $_d_mod" exit 1 } else module_install "$_d_mod" "$moddir" if [[ $no_kernel != yes ]]; then module_installkernel "$_d_mod" "$moddir" || { dfatal "installkernel failed in module $_d_mod" exit 1 } fi fi mods_to_load=${mods_to_load// $_d_mod /} modules_loaded+="$_d_mod " #print the module install size if [ -n "$printsize" ]; then _isize_new=$(du -sk "${initdir}" | { read -r a _ echo -n "$a" }) _isize_delta=$((_isize_new - _isize)) printf "%s\n" "$_d_mod install size: ${_isize_delta}k" _isize=$_isize_new fi done unset moddir for i in $modules_loaded; do mkdir -p "$initdir"/lib/dracut printf "%s\n" "$i" >> "$initdir"/lib/dracut/modules.txt done dinfo "*** Including modules done ***" ## final stuff that has to happen if [[ $no_kernel != yes ]]; then if [[ $hostonly_mode == "strict" ]]; then cp "$DRACUT_KERNEL_MODALIASES" "$initdir"/lib/dracut/hostonly-kernel-modules.txt fi if [[ $drivers ]]; then # shellcheck disable=SC2086 hostonly='' instmods $drivers fi if [[ -n ${add_drivers// /} ]]; then # shellcheck disable=SC2086 hostonly='' instmods -c $add_drivers fi if [[ $force_drivers ]]; then # shellcheck disable=SC2086 hostonly='' instmods -c $force_drivers rm -f "$initdir"/etc/cmdline.d/20-force_driver.conf for mod in $force_drivers; do echo "rd.driver.pre=$mod" >> "$initdir"/etc/cmdline.d/20-force_drivers.conf done fi if [[ $filesystems ]]; then # shellcheck disable=SC2086 hostonly='' instmods -c $filesystems fi dinfo "*** Installing kernel module dependencies ***" dracut_kernel_post dinfo "*** Installing kernel module dependencies done ***" if [[ $noimageifnotneeded == yes ]] && [[ $hostonly ]]; then if [[ ! -f "$initdir/lib/dracut/need-initqueue" ]] \ && [[ -f ${initdir}/lib/modules/$kernel/modules.dep && ! -s ${initdir}/lib/modules/$kernel/modules.dep ]]; then for i in "${initdir}"/etc/cmdline.d/*.conf; do # We need no initramfs image and do not generate one. [[ $i == "${initdir}/etc/cmdline.d/*.conf" ]] && exit 0 done fi fi fi if [[ $kernel_only != yes ]]; then # FIXME: handle legacy item split # shellcheck disable=SC2068 ((${#install_items[@]} > 0)) && inst_multiple ${install_items[@]} # shellcheck disable=SC2068 ((${#install_optional_items[@]} > 0)) && inst_multiple -o ${install_optional_items[@]} if [[ $kernel_cmdline ]] && [[ $uefi != yes ]]; then printf "%s\n" "$kernel_cmdline" >> "${initdir}/etc/cmdline.d/01-default.conf" fi for line in "${fstab_lines[@]}"; do read -r -a fstab_field <<< "$line" if [ -z "${fstab_field[1]}" ]; then # Determine device and mount options from current system mountpoint -q "${fstab_field[0]}" || derror "${fstab_field[0]} is not a mount point!" read -r -a fstab_field < <(findmnt --raw -n --target "${fstab_field[0]}" --output=source,target,fstype,options) dinfo "Line for ${fstab_field[1]}: ${fstab_field[*]}" else # Use default options [ -z "${fstab_field[3]}" ] && fstab_field[3]="defaults" fi # Default options for freq and passno [ -z "${fstab_field[4]}" ] && fstab_field[4]="0" [ -z "${fstab_field[5]}" ] && fstab_field[5]="2" strstr "${fstab_field[2]}" "nfs" && fstab_field[5]="0" echo "${fstab_field[@]}" >> "${initdir}/etc/fstab" done for f in $add_fstab; do cat "$f" >> "${initdir}/etc/fstab" done if [[ $dracutsysrootdir$systemdutildir ]]; then if [[ -d ${initdir}/$systemdutildir ]]; then mkdir -p "${initdir}"/etc/conf.d { printf "%s\n" "systemdutildir=\"$systemdutildir\"" printf "%s\n" "systemdsystemunitdir=\"$systemdsystemunitdir\"" printf "%s\n" "systemdsystemconfdir=\"$systemdsystemconfdir\"" } > "${initdir}"/etc/conf.d/systemd.conf fi fi if [[ $DRACUT_RESOLVE_LAZY ]] && [[ $DRACUT_INSTALL ]]; then dinfo "*** Resolving executable dependencies ***" find "$initdir" -type f -perm /0111 -not -path '*.ko' -print0 \ | xargs -r -0 "$DRACUT_INSTALL" ${initdir:+-D "$initdir"} ${dracutsysrootdir:+-r "$dracutsysrootdir"} -R ${DRACUT_FIPS_MODE:+-f} -- dinfo "*** Resolving executable dependencies done ***" fi # Now we are done with lazy resolving, always install dependencies unset DRACUT_RESOLVE_LAZY export DRACUT_RESOLVE_DEPS=1 fi for ((i = 0; i < ${#include_src[@]}; i++)); do src="${include_src[$i]}" target="${include_target[$i]}" if [[ $src && $target ]]; then if [[ -f $src ]]; then inst "$src" "$target" elif [[ -d $src ]]; then ddebug "Including directory: $src" destdir="${initdir}/${target}" mkdir -p "$destdir" # check for preexisting symlinks, so we can cope with the # symlinks to $prefix # Objectname is a file or a directory reset_dotglob="$(shopt -p dotglob)" shopt -q -s dotglob for objectname in "$src"/*; do [[ -e $objectname || -L $objectname ]] || continue if [[ -d $objectname ]] && [[ ! -L $objectname ]]; then # objectname is a directory, let's compute the final directory name object_destdir=${destdir}/${objectname#$src/} if ! [[ -e $object_destdir ]]; then # shellcheck disable=SC2174 mkdir -m 0755 -p "$object_destdir" chmod --reference="$objectname" "$object_destdir" fi $DRACUT_CP -t "$object_destdir" "$dracutsysrootdir$objectname"/. else $DRACUT_CP -t "$destdir" "$dracutsysrootdir$objectname" fi done eval "$reset_dotglob" elif [[ -e $src ]]; then derror "$src is neither a directory nor a regular file" else derror "$src doesn't exist" fi fi done # strip binaries if [[ $do_strip == yes ]]; then # Prefer strip from elfutils for package size declare strip_cmd strip_cmd=$(command -v eu-strip) [ -z "$strip_cmd" ] && strip_cmd="strip" for p in $strip_cmd xargs find; do if ! type -P $p > /dev/null; then dinfo "Could not find '$p'. Not stripping the initramfs." do_strip=no fi done if [[ $aggresive_strip == yes ]]; then # `eu-strip` and `strip` both strips all unneeded parts by default strip_args=(-p) else strip_args=(-g -p) fi fi # cleanup empty ldconfig_paths directories for d in $(ldconfig_paths); do rmdir -p --ignore-fail-on-non-empty "$initdir/$d" > /dev/null 2>&1 done if [[ $early_microcode == yes ]]; then dinfo "*** Generating early-microcode cpio image ***" ucode_dir=(amd-ucode intel-ucode) ucode_dest=(AuthenticAMD.bin GenuineIntel.bin) _dest_dir="$early_cpio_dir/d/kernel/x86/microcode" _dest_idx="0 1" mkdir -p "$_dest_dir" if [[ $hostonly ]]; then [[ $(get_cpu_vendor) == "AMD" ]] && _dest_idx="0" [[ $(get_cpu_vendor) == "Intel" ]] && _dest_idx="1" fi for idx in $_dest_idx; do _fw=${ucode_dir[$idx]} for _fwdir in $fw_dir; do if [[ -d $_fwdir && -d $_fwdir/$_fw ]]; then _src="*" dinfo "*** Constructing ${ucode_dest[$idx]} ***" if [[ $hostonly ]]; then _src=$(get_ucode_file) [[ $_src ]] || break [[ -r $_fwdir/$_fw/$_src ]] || _src="${_src}.early" [[ -r $_fwdir/$_fw/$_src ]] || break fi for i in $_fwdir/$_fw/$_src; do [ -e "$i" ] && break break 2 done for i in $_fwdir/$_fw/$_src; do [[ -e $i ]] || continue # skip gpg files str_ends "$i" ".asc" && continue cat "$i" >> "$_dest_dir/${ucode_dest[$idx]}" done create_early_cpio="yes" fi done if [[ ! -e "$_dest_dir/${ucode_dest[$idx]}" ]]; then if cd "$early_cpio_dir/d"; then for _ucodedir in "${early_microcode_image_dir[@]}"; do for _ucodename in "${early_microcode_image_name[@]}"; do [[ -e "$_ucodedir/$_ucodename" ]] \ && cpio --extract --file "$_ucodedir/$_ucodename" --quiet \ "kernel/x86/microcode/${ucode_dest[$idx]}" if [[ -e "$_dest_dir/${ucode_dest[$idx]}" ]]; then dinfo "*** Using microcode found in '$_ucodedir/$_ucodename' ***" create_early_cpio="yes" break 2 fi done done fi fi done fi if [[ $acpi_override == yes ]] && [[ -d $acpi_table_dir ]]; then dinfo "*** Packaging ACPI tables to override BIOS provided ones ***" _dest_dir="$early_cpio_dir/d/kernel/firmware/acpi" mkdir -p "$_dest_dir" for table in "$acpi_table_dir"/*.aml; do dinfo " Adding ACPI table: $table" $DRACUT_CP "$table" "$_dest_dir" create_early_cpio="yes" done fi dinfo "*** Store current command line parameters ***" if ! (echo "$PARMS_TO_STORE" > "$initdir"/lib/dracut/build-parameter.txt); then dfatal "Could not store the current command line parameters" exit 1 fi if [[ $hostonly_cmdline == "yes" ]]; then unset _stored_cmdline if [[ -d $initdir/etc/cmdline.d ]]; then dinfo "Stored kernel commandline:" for conf in "$initdir"/etc/cmdline.d/*.conf; do [ -e "$conf" ] || continue dinfo "$(< "$conf")" _stored_cmdline=1 done fi if ! [[ $_stored_cmdline ]]; then dinfo "No dracut internal kernel commandline stored in the initramfs" fi fi if [[ $kernel_only != yes ]]; then # libpthread workaround: pthread_cancel wants to dlopen libgcc_s.so for _dir in $libdirs; do for _f in "$dracutsysrootdir$_dir/libpthread.so"*; do [[ -e $_f ]] || continue inst_libdir_file "libgcc_s.so*" break 2 done done # FIPS workaround for Fedora/RHEL: libcrypto needs libssl when FIPS is enabled if [[ $DRACUT_FIPS_MODE ]]; then for _dir in $libdirs; do for _f in "$dracutsysrootdir$_dir/libcrypto.so"*; do [[ -e $_f ]] || continue inst_libdir_file -o "libssl.so*" break 2 done done fi fi if [[ $kernel_only != yes ]]; then # make sure that library links are correct and up to date build_ld_cache fi if dracut_module_included "squash"; then readonly squash_dir="$initdir/squash/root" readonly squash_img="$initdir/squash-root.img" mkdir -p "$squash_dir" dinfo "*** Install squash loader ***" DRACUT_SQUASH_POST_INST=1 module_install "squash" fi if [[ $do_strip == yes ]] && ! [[ $DRACUT_FIPS_MODE ]]; then # stripping files negates (dedup) benefits of using reflink [[ -n $enhanced_cpio ]] && ddebug "strip is enabled alongside cpio reflink" dinfo "*** Stripping files ***" find "$initdir" -type f \ -executable -not -path '*/lib/modules/*.ko' -print0 \ | xargs -r -0 $strip_cmd "${strip_args[@]}" 2> /dev/null # strip kernel modules, but do not touch signed modules find "$initdir" -type f -path '*/lib/modules/*.ko' -print0 \ | while read -r -d $'\0' f || [ -n "$f" ]; do SIG=$(tail -c 28 "$f" | tr -d '\000') [[ $SIG == '~Module signature appended~' ]] || { printf "%s\000" "$f"; } done | xargs -r -0 $strip_cmd "${strip_args[@]}" dinfo "*** Stripping files done ***" fi if dracut_module_included "squash"; then dinfo "*** Squashing the files inside the initramfs ***" declare squash_compress_arg # shellcheck disable=SC2086 if [[ $squash_compress ]]; then if ! mksquashfs /dev/null "$DRACUT_TMPDIR"/.squash-test.img -no-progress -comp $squash_compress &> /dev/null; then dwarn "mksquashfs doesn't support compressor '$squash_compress', failing back to default compressor." else squash_compress_arg="$squash_compress" fi fi # shellcheck disable=SC2086 if ! mksquashfs "$squash_dir" "$squash_img" \ -no-xattrs -no-exports -noappend -no-recovery -always-use-fragments \ -no-progress ${squash_compress_arg:+-comp $squash_compress_arg} 1> /dev/null; then dfatal "dracut: Failed making squash image" exit 1 fi rm -rf "$squash_dir" dinfo "*** Squashing the files inside the initramfs done ***" # Skip initramfs compress compress="cat" fi dinfo "*** Creating image file '$outfile' ***" if [[ $uefi == yes ]]; then readonly uefi_outdir="$DRACUT_TMPDIR/uefi" mkdir -p "$uefi_outdir" fi clamp_mtimes() { find "$@" -newer "$dracutbasedir/dracut-functions.sh" -print0 \ | xargs -r -0 touch -h -m -c -r "$dracutbasedir/dracut-functions.sh" } if [[ $DRACUT_REPRODUCIBLE ]]; then clamp_mtimes "$initdir" if [[ "$(cpio --help)" == *--reproducible* ]]; then CPIO_REPRODUCIBLE=1 else dinfo "cpio does not support '--reproducible'. Resulting image will not be reproducible." fi fi # Hardlink is mtime-sensitive; do it after the above clamp. if [[ $do_hardlink == yes ]] && command -v hardlink > /dev/null; then dinfo "*** Hardlinking files ***" hardlink "$initdir" 2>&1 | ddebug dinfo "*** Hardlinking files done ***" # Hardlink itself breaks mtimes on directories as we may have added/removed # dir entries. Fix those up. if [[ $DRACUT_REPRODUCIBLE ]]; then clamp_mtimes "$initdir" -type d fi fi [[ $EUID != 0 ]] && cpio_owner="0:0" if [[ $create_early_cpio == yes ]]; then echo 1 > "$early_cpio_dir/d/early_cpio" if [[ $DRACUT_REPRODUCIBLE ]]; then clamp_mtimes "$early_cpio_dir/d" fi # The microcode blob is _before_ the initramfs blob, not after if [[ -n $enhanced_cpio ]]; then if ! ( umask 077 cd "$early_cpio_dir/d" find . -print0 | sort -z \ | $enhanced_cpio --null ${cpio_owner:+--owner "$cpio_owner"} \ --mtime 0 --data-align "$cpio_align" --truncate-existing \ "${DRACUT_TMPDIR}/initramfs.img" ); then dfatal "dracut-cpio: creation of $outfile failed" exit 1 fi else if ! ( umask 077 cd "$early_cpio_dir/d" find . -print0 | sort -z \ | cpio ${CPIO_REPRODUCIBLE:+--reproducible} --null \ ${cpio_owner:+-R "$cpio_owner"} -H newc -o --quiet > "${DRACUT_TMPDIR}/initramfs.img" ); then dfatal "dracut: creation of $outfile failed" exit 1 fi fi fi if check_kernel_config CONFIG_RD_ZSTD; then DRACUT_KERNEL_RD_ZSTD=yes else DRACUT_KERNEL_RD_ZSTD= fi if [[ $compress == $DRACUT_COMPRESS_ZSTD* && ! $DRACUT_KERNEL_RD_ZSTD ]]; then dwarn "dracut: kernel has no zstd support compiled in." compress= fi if [[ $compress && $compress != cat ]]; then if ! command -v "${compress%% *}" &> /dev/null; then derror "dracut: cannot execute compression command '$compress', falling back to default" compress= fi fi if ! [[ $compress ]]; then # check all known compressors, if none specified for i in $DRACUT_COMPRESS_PIGZ $DRACUT_COMPRESS_GZIP $DRACUT_COMPRESS_LZ4 $DRACUT_COMPRESS_LZOP $DRACUT_COMPRESS_ZSTD $DRACUT_COMPRESS_LZMA $DRACUT_COMPRESS_XZ $DRACUT_COMPRESS_LBZIP2 $DRACUT_COMPRESS_BZIP2 $DRACUT_COMPRESS_CAT; do [[ $i != "$DRACUT_COMPRESS_ZSTD" || $DRACUT_KERNEL_RD_ZSTD ]] || continue command -v "$i" &> /dev/null || continue compress="$i" break done if [[ $compress == cat ]]; then dwarn "dracut: no compression tool available. Initramfs image is going to be big." else dinfo "dracut: using auto-determined compression method '$compress'" fi fi # choose the right arguments for the compressor case $compress in bzip2 | lbzip2) if [[ $compress == lbzip2 ]] || command -v "$DRACUT_COMPRESS_LBZIP2" &> /dev/null; then compress="$DRACUT_COMPRESS_LBZIP2 -9" else compress="$DRACUT_COMPRESS_BZIP2 -9" fi ;; lzma) compress="$DRACUT_COMPRESS_LZMA -9 -T0" ;; xz) compress="$DRACUT_COMPRESS_XZ --check=crc32 --lzma2=dict=1MiB -T0" ;; gzip | pigz) if [[ $compress == pigz ]] || command -v "$DRACUT_COMPRESS_PIGZ" &> /dev/null; then compress="$DRACUT_COMPRESS_PIGZ -9 -n -T -R" elif command -v gzip &> /dev/null && $DRACUT_COMPRESS_GZIP --help 2>&1 | grep -q rsyncable; then compress="$DRACUT_COMPRESS_GZIP -n -9 --rsyncable" else compress="$DRACUT_COMPRESS_GZIP -n -9" fi ;; lzo | lzop) compress="$DRACUT_COMPRESS_LZOP -9" ;; lz4) compress="$DRACUT_COMPRESS_LZ4 -l -9" ;; zstd) compress="$DRACUT_COMPRESS_ZSTD -15 -q -T0" ;; esac if [[ -n $enhanced_cpio ]]; then if [[ $compress == "cat" ]]; then # dracut-cpio appends by default, so any ucode remains cpio_outfile="${DRACUT_TMPDIR}/initramfs.img" else ddebug "$compress compression enabled alongside cpio reflink" # dracut-cpio doesn't output to stdout, so stage for compression cpio_outfile="${DRACUT_TMPDIR}/initramfs.img.uncompressed" fi if ! ( umask 077 cd "$initdir" find . -print0 | sort -z \ | $enhanced_cpio --null ${cpio_owner:+--owner "$cpio_owner"} \ --mtime 0 --data-align "$cpio_align" "$cpio_outfile" || exit 1 [[ $compress == "cat" ]] && exit 0 $compress < "$cpio_outfile" >> "${DRACUT_TMPDIR}/initramfs.img" \ && rm "$cpio_outfile" ); then dfatal "dracut-cpio: creation of $outfile failed" exit 1 fi unset cpio_outfile else if ! ( umask 077 cd "$initdir" find . -print0 | sort -z \ | cpio ${CPIO_REPRODUCIBLE:+--reproducible} --null ${cpio_owner:+-R "$cpio_owner"} -H newc -o --quiet \ | $compress >> "${DRACUT_TMPDIR}/initramfs.img" ); then dfatal "dracut: creation of $outfile failed" exit 1 fi fi # shellcheck disable=SC2154 if ((maxloglvl >= 5)) && ((verbosity_mod_l >= 0)); then if [[ $allowlocal ]]; then "$dracutbasedir/lsinitrd.sh" "${DRACUT_TMPDIR}/initramfs.img" | ddebug else lsinitrd "${DRACUT_TMPDIR}/initramfs.img" | ddebug fi fi umask 077 SBAT_DEFAULT="sbat,1,SBAT Version,sbat,1,https://github.com/rhboot/shim/blob/main/SBAT.md" sbat_out=$uefi_outdir/uki.sbat clean_sbat_string() { local inp=$1 local temp=$uefi_outdir/temp.sbat sed "/${SBAT_DEFAULT//\//\\/}/d" "$inp" > "$temp" [[ -s $temp ]] && cat "$temp" >> "$sbat_out" rm "$temp" } get_sbat_string() { local inp=$1 local out=$uefi_outdir/$2 objcopy -O binary --only-section=.sbat "$inp" "$out" clean_sbat_string "$out" } if [[ $uefi == yes ]]; then if [[ $kernel_cmdline ]]; then echo -n "$kernel_cmdline" > "$uefi_outdir/cmdline.txt" elif [[ $hostonly_cmdline == yes ]] && [ -d "$initdir/etc/cmdline.d" ]; then for conf in "$initdir"/etc/cmdline.d/*.conf; do [ -e "$conf" ] || continue printf "%s " "$(< "$conf")" >> "$uefi_outdir/cmdline.txt" done fi # shellcheck disable=SC1004 offs=$(objdump -h "$uefi_stub" 2> /dev/null | gawk 'NF==7 {size=strtonum("0x"$3);\ offset=strtonum("0x"$4)} END {print size + offset}') if [[ $offs -eq 0 ]]; then dfatal "Failed to get the size of $uefi_stub to create UEFI image file" exit 1 fi align=$(pe_get_section_align "$uefi_stub") if [[ $? -eq 1 ]]; then dfatal "Failed to get the SectionAlignment of the stub PE header to create the UEFI image file" exit 1 fi offs=$((offs + "$align" - offs % "$align")) [[ -s $dracutsysrootdir/usr/lib/os-release ]] && uefi_osrelease="$dracutsysrootdir/usr/lib/os-release" [[ -s $dracutsysrootdir/etc/os-release ]] && uefi_osrelease="$dracutsysrootdir/etc/os-release" [[ -s $uefi_osrelease ]] \ && uefi_osrelease_offs=${offs} \ && offs=$((offs + $(stat -Lc%s "$uefi_osrelease"))) \ && offs=$((offs + "$align" - offs % "$align")) if [[ $kernel_cmdline ]] || [[ $hostonly_cmdline == yes && -d "$initdir/etc/cmdline.d" ]]; then echo -ne "\x00" >> "$uefi_outdir/cmdline.txt" dinfo "Using UEFI kernel cmdline:" dinfo "$(tr -d '\000' < "$uefi_outdir/cmdline.txt")" uefi_cmdline="${uefi_outdir}/cmdline.txt" uefi_cmdline_offs=${offs} offs=$((offs + $(stat -Lc%s "$uefi_cmdline"))) offs=$((offs + "$align" - offs % "$align")) else unset uefi_cmdline fi if [[ -s ${dracutsysrootdir}${uefi_splash_image} ]]; then uefi_splash_image="${dracutsysrootdir}${uefi_splash_image}" uefi_splash_offs=${offs} offs=$((offs + $(stat -Lc%s "$uefi_splash_image"))) offs=$((offs + "$align" - offs % "$align")) else unset uefi_splash_image fi echo "$SBAT_DEFAULT" > "$sbat_out" if [[ -n $sbat ]]; then echo "$sbat" | sed "/${SBAT_DEFAULT//\//\\/}/d" >> "$sbat_out" fi get_sbat_string "$kernel_image" kernel.sbat get_sbat_string "$uefi_stub" stub.sbat uefi_sbat_offs="${offs}" offs=$((offs + $(stat -Lc%s "$sbat_out"))) offs=$((offs + "$align" - offs % "$align")) uefi_linux_offs="${offs}" offs=$((offs + $(stat -Lc%s "$kernel_image"))) offs=$((offs + "$align" - offs % "$align")) uefi_initrd_offs="${offs}" base_image=$(pe_get_image_base "$uefi_stub") if [[ $? -eq 1 ]]; then dfatal "Failed to get ImageBase data of $uefi_stub to create UEFI image file" exit 1 fi tmp_uefi_stub=$uefi_outdir/elf.stub cp "$uefi_stub" "$tmp_uefi_stub" objcopy --remove-section .sbat "$tmp_uefi_stub" &> /dev/null if objcopy \ ${uefi_osrelease:+--add-section .osrel="$uefi_osrelease" --change-section-vma .osrel=$(printf 0x%x "$uefi_osrelease_offs")} \ ${uefi_cmdline:+--add-section .cmdline="$uefi_cmdline" --change-section-vma .cmdline=$(printf 0x%x "$uefi_cmdline_offs")} \ ${uefi_splash_image:+--add-section .splash="$uefi_splash_image" --change-section-vma .splash=$(printf 0x%x "$uefi_splash_offs")} \ --add-section .sbat="$sbat_out" --change-section-vma .sbat="$(printf 0x%x "$uefi_sbat_offs")" \ --add-section .linux="$kernel_image" --change-section-vma .linux="$(printf 0x%x "$uefi_linux_offs")" \ --add-section .initrd="${DRACUT_TMPDIR}/initramfs.img" --change-section-vma .initrd="$(printf 0x%x "$uefi_initrd_offs")" \ --image-base="$(printf 0x%x "$base_image")" \ "$tmp_uefi_stub" "${uefi_outdir}/linux.efi"; then if [[ -n ${uefi_secureboot_key} && -n ${uefi_secureboot_cert} ]]; then if sbsign \ --key "${uefi_secureboot_key}" \ --cert "${uefi_secureboot_cert}" \ --output "$outfile" "${uefi_outdir}/linux.efi"; then dinfo "*** Creating signed UEFI image file '$outfile' done ***" else dfatal "*** Creating signed UEFI image file '$outfile' failed ***" exit 1 fi else if cp --reflink=auto "${uefi_outdir}/linux.efi" "$outfile"; then dinfo "*** Creating UEFI image file '$outfile' done ***" fi fi else rm -f -- "$outfile" dfatal "*** Creating UEFI image file '$outfile' failed ***" exit 1 fi else if cp --reflink=auto "${DRACUT_TMPDIR}/initramfs.img" "$outfile"; then dinfo "*** Creating initramfs image file '$outfile' done ***" else rm -f -- "$outfile" dfatal "dracut: creation of $outfile failed" exit 1 fi fi btrfs_uuid() { btrfs filesystem show "$1" | sed -n '1s/^.*uuid: //p' } freeze_ok_for_btrfs() { local mnt uuid1 uuid2 # If the output file is on btrfs, we need to make sure that it's # not on a subvolume of the same file system as the root FS. # Otherwise, fsfreeze() might freeze the entire system. # This is most conveniently checked by comparing the FS uuid. [[ "$(stat -f -c %T -- "/")" == "btrfs" ]] || return 0 mnt=$(stat -c %m -- "$1") uuid1=$(btrfs_uuid "$mnt") uuid2=$(btrfs_uuid "/") [[ $uuid1 && $uuid2 && $uuid1 != "$uuid2" ]] } freeze_ok_for_fstype() { local outfile=$1 local fstype [[ "$(stat -c %m -- "$outfile")" == "/" ]] && return 1 fstype=$(stat -f -c %T -- "$outfile") case $fstype in msdos) return 1 ;; zfs) return 1 ;; btrfs) freeze_ok_for_btrfs "$outfile" ;; *) return 0 ;; esac } # We sync/fsfreeze only if we're operating on a live booted system. # It's possible for e.g. `kernel` to be installed as an RPM BuildRequires or equivalent, # and there's no reason to sync, and *definitely* no reason to fsfreeze. # Another case where this happens is rpm-ostree, which performs its own sync/fsfreeze # globally. See e.g. https://github.com/ostreedev/ostree/commit/8642ef5ab3fec3ac8eb8f193054852f83a8bc4d0 if [[ -d $dracutsysrootdir/run/systemd/system ]]; then if ! sync "$outfile" 2> /dev/null; then dinfo "dracut: sync operation on newly created initramfs $outfile failed" exit 1 fi # use fsfreeze only if we're not writing to / if [[ "$(stat -c %m -- "$outfile")" != "/" ]] && freeze_ok_for_fstype "$outfile"; then FSFROZEN="$(dirname "$outfile")" if ! (fsfreeze -f "${FSFROZEN}" 2> /dev/null && fsfreeze -u "${FSFROZEN}" 2> /dev/null); then dinfo "dracut: warning: could not fsfreeze $(dirname "$outfile")" fi unset FSFROZEN fi fi exit 0